Home > Products > Accessories & Components > Electric Parts >LED Driver

hot sale high power IP67 plant light constant isolated current led driver

MOQ ：500 piece

Lead Time ：15 Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : T/T

Departure Port : Shenzhen

Product details

Supply Ability

Supply Ability：300000 piecesWarranty(Year)：5 Year

Product Specifications

Brand name：Beon
Housing Material：Aluminum
IP Rating：IP67
Application：Isolated Fluorescent Lamp/High-power LED/LED Spotlight/Other
Input voltage：220V-240V
Output Power：50w 100w 150w 20w 240w 300w 400w LED driver
Certification：CB， CE， RoHS， CCC

Product Description

Industry Lighting 804 Series LED Power Supply

Features

Rated input voltage range: 100~277Vac
Constant current output
Efficiency:88%/ High PF>0.95/ THD<15%
Protection:OVP/OCP /SCP /OTP
Surge protection: DM 6KV, CM 6KV
Lifetime of over 50,000 hours, 5-year warranty

PRODUCT DETAILS

Send Your Inquiry

Industry Lighting 804 Series LED Power Supply

BA-804 series is an isolated constant current LED power supply.

It is designed for LED lighting, THD<15%, compact shell design, high safety, fully potted with thermal silica gel to ensure heat dissipation and waterproof performance.

Technical Data

LED POWER SUPPLY 804 SERIES

Beon LED driver catalog 23-24_19

Production Line Pictures

SOLDER PASTE PRINTING

Solder Paste on PCB

Purpose:Print the solder paste (or red glue) on the corresponding position of the PCB.

Quality requirements:1, the solder paste must be a regular shape; 2, use a magnifying glass to check the solder paste printing effect, if there is poor printing, then the front printed products, need to carry out a full inspection;

Plug-in production line

1. Check whether the required production model is consistent with the scheduled production model.

2. Check whether the material is consistent with the BOM list.

3. Check whether the electrostatic bracelet is grounded and keeps it tight to the skin of the hand.

4. The plug-in process should comply with the principle of small after large, short after high; The front station element cannot affect the rear station element plug-in.

5. After the plug-in is finished, check the current process carefully, whether there is wrong insertion, insertion reverse, missing insertion, high piece phenomenon.

BA LIGHT quality control

check and solder circuit boards

Check and solder circuit boards

1. Check whether the cutting foot height meets requirements.

2. Check whether the board after tin meets the requirements. If the defective rate exceeds 5%, it needs to be returned to the previous process for rework.

3. Confirm that the positive and negative electrodes of the welding wire are consistent with the requirements of the circuit board, and the input and output colors are consistent with the requirements.

100% Aging Test

According to the requirements of led power supply characteristics, the aging is divided into three gears (low-voltage impact gear AC90V, high-voltage impact gear AC270V, normal voltage AC220V), and the total running time is 4 hours.

driver aging